Valentine Heart Pin
This beautiful Valentine Heart Pin will be treasured for years to come.
Supplies8 inch red pipe cleaner
Lacy ribbon, approximately 3/4 inch wide
Small length of ribbon for the bow
Pin backing of choice
Begin the pin by threading a red tri-bead on to the pipe cleaner. Next, thread the ribbon on to the pipe cleaner, through one of the lacy holes. Follow with another red tri-bead. Work near the end of the pipe cleaner, for easier threading. Continue by threading the ribbon on again, as shown below.
Continue threading until you have most of the pipe cleaner covered. Below are close ups of how the pipe cleaner should look from the side, and from the top.
When most of the pipe cleaner is threaded, wrap the remaining pipe cleaner tightly around the last tri-bead to secure it.
Bend the pipe cleaner in the shape of a heart, and secure the ends by wrapping the last tri-beads together with a thin piece of wire.
Add a small bow to the pin. This can be secured with a fine wire or some glue. Add on the pin back and the beaded heart pin is ready to wear!
This craft reprinted courtesy of crafts-for-all-seasons.com.
The Crafts For All Seasons website has many craft projects for every season of the year! There are easy step by step instructions, with many photos to help along the way. Please stop by and browse over 100 craft tutorials!
0 thoughts on “Valentine Heart Pin”